Magnetic Bulletin Board

~ A Note About the Nester ~

When it came to finding a key holder for our kitchen, I searched high and low and struck out. It feels like I always end up creating it instead. The upside about this dilemma is that I create unique things that no one else owns. Today, I want to show you how to make a bulletin board that is magnetic and can also house your keys. This project has endless possibilities, and if you want a big bulletin board, this is not a problem, just buy a big frame. You can surface it with paper, chalk paint, fabric or keep it plain. Also, you can change out the look with the seasons or decor. If you like bulletin boards, I have a dry erase board that is so easy to make, and you can color it any color. Here is the link: Dry Erase Board Ok, let’s get started.

 

Supplies:

Galvanized Aluminum (you can find sheets or rolls in the Hardware store’s roofing dept)

Picture Frame

Paper, fabric, paint

scissors

hooks (if you want to hang keys)

glue (Crafter’s Pick works with wood)

Instructions:

1. This is an optional step. Glue the hooks to the frame. Do one at a time and let dry for an hour before continuing with the project. I would wait a day before hanging keys from them.

 

 

2. Remove the glass from your frame. Use the paper from the frame to use as a pattern for cutting out the aluminum. Use a sharpie marker and trace around the template.

3. Cut the metal with your metal scissors. It is best to cut it a tiny bit smaller than the outline.

4. At this stage, you’ll want to make sure the metal sheet fits in the frame. If it catches and is too tight, trim the metal sheet.

 

4. To prevent the sharp edges from cutting you, place painter’s tape around the edges of the metal.

5. Cut out your paper or fabric to size. If you choose to paint the aluminum, paint one side.

 

6. Tape down the paper on the metal.

 

7. Place your decorated metal into the frame and then place everything back into the frame and close up the back.Tada, you’re done, and now you have a new homemade bulletin board. I placed a temporary hook on our cabinets and hung the board from it. I must note that the keys will cause it to be unbalanced at times, so I plan to use 3M temporary velcro to place on the wall and the bulletin board. This will prevent the movement of the board.

 

 

I did decorate mine with some fun flowers and ribbon, let your imagination have fun with this part of the project. If you are making it for a child, maybe place a wooden initial on the frame.

Thanks for the visit, and I hope my blog is inspiring you to create things for your home!

Cheers,